blinking power light

How to Fix Flashing Power Light on Netgear Router

When you’re having trouble with your wireless home network, the first thing to check is the lights on your router. These lights says more about the Wi-Fi and Ethernet connections, the Internet signal, the connections between the wireless router and the devices connected to it, and so on. Most people don’t know what to make of the blinking Netgear Power light, which is one of the status lights.

This article will explain what the Flashing Power Light on Netgear Router means and how you can fix the problem on your own.

Why does the power light on my Netgear router blink?

The Power light on our Netgear router should be amber (yellow or orange) for around twenty to thirty seconds after we turn it on, and then it should change to either white or green.If the Power light stays the same color or keeps blinking, there is a problem.

Netgear says that, depending on the model of the router, the Power light begins flashing in one of three colors. Each color means a different problem.

For example, if you use a Netgear R8000 Nighthawk X6 AC3200 router and the Power light is blinking amber or white, that means the router is in AP mode.

For the other models, broken firmware is shown by a white Power light that blinks or a Power light that blinks slowly and constantly. And if the power light NetGear router blinking amber (orange, yellow), you may have pressed the Reset button, or there is a firmware update going on.

How to Fix a Netgear Router Power Light That Blinks?

Even though there are easier ways to fix these problems, we have to be careful when trying to figure out why the Power light is blinking. One of the reasons for this is that the firmware is broken or is being updated. We’re going to check this first because turning off the router during a firmware upgrade could cause the firmware to become corrupted.

Running Automatic Firmware Update

Some Netgear routers can be set to get the latest version of their firmware automatically. During this process, the router may automatically restart, which means you won’t be able to connect to the Internet until it starts up again. Most of the time, this happens between 1, and 4 am when there isn’t much going on. But if this happens during the day, log in to your Netgear router and go to the Schedule or NTP settings to make sure your Local time is set correctly.

The NetGear router blinking lights if an automatic firmware update is happening in the background. Most of the time, this won’t take long, and the blinking should stop once the firmware update is done. If the Power indicator is blinking, you can’t stop the firmware update by switching off the router or doing anything else until the procedure is done.

Check the cords and the power adapter

The Power light may be blinking because of the Power adapter sometimes. Check if it is securely connected to the router and the power source to see if it is the problem. And it is also best to use the power adapter that Netgear gives you.

The Power light may also blink if the cables are broken. If you have extra cables, try swapping them out to see if the problem still happens. If the problem was caused by a broken cable, the Power or LED light should stop blinking once the cable is fixed.

Turn on your Netgear router again

Restarting or cycling the power on the router is an easy and very effective thing to do. Most of the time, it will fix the problem with the Power light blinking and other problems you might be having with your router. The whole thing is very easy to do. Pull the power cord out of the router. Let it sit for a while. Some would say 5 minutes, while others would say about 30 minutes. But after that time, plug the router back into the power source and check to see if the Power light is still blinking. If it is, try the next solution or turn the router off and back on again.

Your Netgear router’s firmware needs to be updated

If your Netgear router doesn’t turn on because the firmware is broken, you can try reloading the firmware using Windows TFTP. Netgear has a detailed guide on how to do this right, which you can read here, or you can look online for videos that show you how to do it:

How to use Windows TFTP to put firmware on a NETGEAR router?

The steps in this guide require some knowledge of networking, so you should read the instructions first and only move forward if you know what you need to do. But if you aren’t sure what you’re doing or are afraid you might mess things up, you should call Netgear’s support team for help.

Router Problems

If the Power light keeps blinking even after you’ve tried everything in this article, your router may be broken or not working correctly. In this case, you should get in touch with Netgear’s tech support.

Last Words

As you can see, the NetGear router blinking led lights has much to do with the firmware. Because of this, we recommend that you keep the router’s firmware up-to-date to avoid problems like this. If for some reason, the firmware update fails and the Power light starts blinking again, you will know what to do.