The requirement for additional routers in a network can arise during network expansion. You can’t add another router to your network without first learning router cascading. This guide will show you how to cascade routers to add more devices to your network without causing any problems. A cascade netgear router can be connected in one of two ways. Ensure the secondary router is not linked to the primary router before setting it up for router cascade.
Numerous Techniques for Chaining Together Two Routers
Inter-LAN Router Chaining
Linking the second router to the first via its LAN or Ethernet port. In this configuration, all the devices on either the first or second router are part of the same network and can freely exchange data.
Combining Wide Area Networks with Local Area Networks via Routers
Establishing a connection between the second router’s WAN port and a local area network (LAN) port on the first router. This strategy may split the network and give each half a unique IP address.
Let’s examine the merits of each approach to extending a network by linking two routers. Different methods for expanding a network produce varying results. You will need the primary router’s IP address before you can set up the secondary router.
Router cascading between local area networks
This method is employed when devices linked to the secondary router should share the same IP address. The second router here serves as a switch to increase the scope of your existing network.
Join your personal computer to Router 2’s LAN port.
Connect to the Backup Router
Log in to the router’s configuration page through the web. Follow the instructions at the URL below to view your router’s configuration page online.
The Best Way to Track Down My Router’s Access URL
Modify Router 2’s Internet Protocol Address
When the router’s configuration screen loads, look for Local IP Address and enter “192.168.X.Y” (where X and Y are numbers between 0 and 255; most routers use 192.168.X.1). We need to make sure that Y is a positive integer between 0 and 255 that is not within Router 1’s DHCP range.
For instance, set the IP address to 192.168.X.200 (where X is the same as router 1). The first router (the central wifi connected to the modem) gives its IP address to the second router.
Stop Using Dynamic Host Configuration Protocol On Router 2
Once the web-based configuration page loads, locate DHCP Server and select the toggle to turn it off. Ensure that your preferences are saved. Select Router as the Operating Mode under “Advanced Routing.” (This may vary between router models and manufacturers.
Join Router 2 to the Primary Router
Use an Ethernet wire to link the LAN ports on the first and second routers. The broadband modem should be connected via an Ethernet cable to one of the primary router’s numbered Ethernet ports. When configuring your router, plug the other end of the Ethernet wire into the router’s Ethernet port.
The secondary router’s IP address should be 192.168.0.101 if the primary router’s IP address is 192.168.0.1 within the DHCP range of 100. In that case, no other cascade of routers will do the trick.
To connect more wireless devices to the network while keeping the same IP address scheme, many customers choose to cascade a new wireless router with an existing wired router. Users frequently resort to Netgear cascading routers when connecting a wireless router to an already established network. Cascading two wireless routers is a separate process from this one.
Combining Wide Area Networks with Local Area Networks via Routers (Method 2)
Before using the WAN to LAN cascade Method, ensure each router has unique IP addresses. To avoid potential problems, it is recommended to change the IP address of the second router if they are using the same address. The second router in a WAN-to-LAN Netgear setup as a cascading router should be configured as follows:
Create a Separate Network for Each Router
Check the third octet of the network addresses to verify sure they are different on both routers if they share a network. Use 192.168.1.5 for the first router and 192.168.2.1 for the second. Continue to Step 2 if the Third Octet Number of both Routers is the Same.
Update the last octet of Router 2’s IP Address
Change the Local IP Address setting to “192.168.X.1” on the second router’s configuration page. In this expression, X can be any positive integer between 0 and 255 other than the value in the first router. To illustrate, if the first router’s IP address is 192.168.5.1, the second router’s X might be any integer from 0 to 255 other than 5. Ensure that your preferences are saved.
Check that the second router’s DHCP server is enabled.
Join the WAN interface of the second router to the WAN interface of the first
The broadband modem should be linked via an Ethernet cable to one of the primary router’s numbered Ethernet ports. After configuring your router’s Internet connection, connect the other end of the Ethernet cable to the router’s Internet port.
Netgear cascade router from different manufacturers are my audience’s common topic of inquiry. Routers from other manufacturers can be cascaded without incident. If you want to cascade a Linksys router with a Belkin router or a D-Link router, you won’t have any problems doing so because router cascading is vendor-agnostic.
Methods for Cascading Routers
Cascading three routers
More than two routers may need to be cascaded in a larger network. Click the link below for information on connecting the third router in a cascade to an existing two-router setup.
Link aggregation and the Performance of Multiple Routers
Users who execute cascade netgear router see a decrease in Internet speed. If you’re experiencing a slow Internet connection after switching between two routers, check out the link below for some troubleshooting tips and practical advice.