If you forgot the password and the NETGEAR C7000 router is giving you trouble, you need to reset it. When you reset the router, it goes back to how it was set up when it was first made. In different situations, you may need to reset the router. It’s easy to figure out how to reset a NetGear router.
You can easily do this here. The hard reset NetGear c7000 can be reset for free. You can use the button or the web-based Configuration utility to reset the NetGear router. When you reset the router to factory settings, any changes you made to the router will be lost. The internet and wifi settings will need to be changed.
Reset is not the same as Reboot
Reset and Reboot are two different things, so it’s very important to know the difference between them. Rebooting is common on all kinds of devices when they aren’t working the way you want them to. A router can be turned back on.
A restart or reboot is a single step that turns something off and back on.
Resetting everything is the same thing as master reset, restore, factory reset, and hard reset. When you reset the device, it will come back to life as if it were brand new.
Resetting means putting the router settings back to how they were when it was first made. First, you have to do a hard reset on the router, and then you can use the default password to get in.
How to Reset NETGEAR C7000 with a Button
This is the easiest way to how hard reset c7000 NetGear. This Reset button is on every router. Reset your device and get rid of all of its internet and wireless settings.
Method – 1
- Check to make sure your router is already on and plugged into a power source.
- Then, look on the back or bottom of your router for a round button called “Reset.”
- Take the tip of a pin or paperclip.
- In this step, press and hold the Reset button for about 15 seconds.
- The router will start up again, and the reset will take a few seconds to finish.
Method – 2
- Take the power cord out of your router.
- Find the button on the router that says “Pair.”
- After that, press and hold the Pair button and plug the power adapter back in.
- When the power LED light starts to flash, let go of the Pair button.
- When you’re done, the LED light will turn blue.
- In the end, the Router will restart itself.
Method – 3
- Put your router to sleep.
- Then, find the button that says “Set” on the router.
- Then, press and hold the Set button while turning on your router.
- When you let go of the Set button after 20 seconds, the red LED light starts to flash.
In the end, the Router will restart itself.
Method – 4
- Put your router to sleep.
- Find the WPS button on the router in this step.
- Then, press and hold the WPS button while turning on your router.
- Now, keep holding until the flashing power light stops.
- In the end, the Router will restart itself.
When resetting the NetGear router, the firmware no longer returns to an older version. All settings will be changed.
Web-Based Configuration Utility to Reset
To use a web-based configuration utility to reset the NetGear c7000 factory reset, you should know a little about computers and browsers. With this tool, you can easily reset and start over. You don’t need to download any software or tools for this method.
This method will erase all of your router’s internet and wireless settings.
If the IP address, username, and password that come with the router don’t work, look behind them.
Method – 1
- Open any web browser and type the IP address into it.
- Then, you’ll need to enter your Username and Password.
- Then choose the option for “Administration.”
- then click the Restore, Save, or Upload Settings tab.
- Choose Restore to factory settings.
- Then, click the “OK” button.
- Your device will start up again.
- Your NetGear router has been reset.
Method – 2
- Open a web browser and type the IP address into it.
- Look at the IP address and login information below.
- Then, type in your Username and Password.
- Then choose the option to take care of it.
- Then, select the option for Backup Settings.
- Choose “Erase” from the list of options under “Rivet factory default settings.”
- In this step, choose the “yes” answer.
- Your device will start up again.
- Your NetGear router has been reset.
Getting to the interface
IP: 192.168.1.1 (or www.routerlogin.net)
Username: admin
Password: admin
- Check to see if your router is turned on and connected to a power source.
- After that, connect the device to the router using either a network cable or WiFi.
- Then, in the address line, type the IP address or URL.
- Tap the Enter key on your keyboard.
- In the open interface, enter the username and password.
- Now, make sure again.
Start up your NETGEAR C7000 Router again
Rebooting the router means turning the power off and on or giving it a fresh start. Follow these steps if you need to factory reset Netgear c7000.
Method – 1
- Unplug the power cord from the back of the router and plug it back in.
- This step is to wait more than 20 seconds for the router to start up again.
- When your wireless router restarts, your internet connection may also go down.
Method – 2
- Go to the tools or maintenance tab.
- Then, to save and recover settings or system configurations, click the Save button..
- Click on Rebooting or Reboot the device in this step.
- Lastly, wait a while, and you’re done successfully rebooting.